metal tag
| Topic | Replies | Last post |
|---|---|---|
|
Metal detectors Did not post this in "crafts and hobbies"because thats just needlework and quilting, Anyway anyone recently bought a metal detector for finding coins etc, what is a good brand without spending over $700.00 dont want to end up with a toy. |
4 | |
|
I have a fair bit of scrap metal eg dryer metal pipes, etc. Do you people think its worthwhile me packing it into station wagon and taking to scrap dealer or should I just give it away to someone who collects metal scrap. I have abit of copper. Yes today I have just received the rates bill. Thank... |
9 | |
|
Metal dowel pegs for furniture Is there a specific name for these and where would I find them please? Google has been no help so far ? |
6 | |
|
Car Wreckers or Scrap metal? Are they the same, if not, where would one fetch the best price to dump a car. |
10 | |
|
How to lacquer metal garden ornaments I have been given one of these and would prefer it to stay looking as it does now rather than rustic rust looking. So how do I treat it and with what TIA |
13 | |
|
Cleaning metal Venetian blinds Hi We have moved into a home with dirty, thick grime metal venetians. Tried cleaning in place but the metal bucklesas u need to rub hard to remove grime. If we remove and put in bath what can be used to loosen or remove this caked on grime! |
11 | |
|
Removing part of a metal roof Hi, I need to remove several sheets of concealed fixed roofing (similar to Dimond deck 400), do some work underneath and then relay the orginal sheets. The sheets are around 7m long from ridge to gutter. The sheets I need to remove are in the middle of th... |
6 | |
|
Repairing plastic tank with metal frame It's one of those square tanks with a metal frame round, not sure of the exact name for them but like auction # 571328663.It has a hole in that's too big for silicone sealant. What can I use to repair and make it water tight please! It's |
10 | |
|
Metal Detector.anyone ideas on a good one? Bump for any further updates? Like to what depth does the minelab vanquish 540 work? |
23 | |
|
Replace underfloor metal foil? Any idea what the R value of that gib board with the foil is Vs gib without the foil? This is in a house that was consented 1979. |
92 | |
|
Cutting through metal of broken outdoor furniture I need to dispose of big outdoor furniture setting sun damaged rattan. I have a ryobi circular saw in my possession. Could I get a metal cutting blade and chop it all up for easier disposal? Anyone done this? |
13 | |
|
Metal doors and their locks We have several metal-framed glass doors. Every summer, two become difficult to lock. I have studied the two and can't see why. The locks work fine when the doors are open. Obviously heat has something to do with it but I can't see how. Anyone |
15 | |
|
Metal x clear coated a stained micrarpa slab with this aweek later its still tacky will this dry eventually or have i stuffed up |
4 | |
|
Since when do they put metal inside plywood? howdy, Was sawing thru some plywood and heard the saw change pitch for a second, took a closer look and saw what looks like a nail or thin piece of metal embedded between the layers of ply. here's a photo: |
12 | |
|
DIY - Painting Duram195 on a metal roof Has anyone used this rubber paint to seal rust on an old roof. This roof is under decking timber and while there is no leak in it, we want to stop it beforehand. |
4 | |
|
Rusted metal guttering My coastal house has early 90s chunky metal guttering with metal flashing recessed below it. Underside (only) of guttering, plus the flashing, is pitted/bubbling, and have had a painter quote to have it sanded, treated and repainted. Two corners of the fl... |
20 | |
|
Retrofit metal runners to pre-existing drawers? Is this possible at reasonable cost? My solid wood kitchen drawers are presently sawdust factories depositing sawdust into the drawers below. |
11 |