We have been gifted some very old ceramic tiles and want to use them as a splash back in the laundry. However we would like to do this without permanently fixing them to the wall in order to preserve them as an antique in their own right. Ideas how? Wooden beading has been suggested but how can you keep that clean? Ideas appreciated and thanks in advance
underconstructy,
Jul 25, 5:07am
Double sided tape.
lesleyd3,
Jul 25, 5:12am
As something that will hold for years?
bluecat1529,
Jul 25, 5:25am
Set them up as per normal tiles with spacers but use self adhesive velcro dots to hold them in place. Then take the spacers out and neatly silicon the gaps. Run a knife around the tiles when you want to remove them
lesleyd3,
Jul 25, 5:39am
That sounds possible. Thanks
zak410,
Jul 25, 6:00am
fix them on a piece of plywood, with a frame and just lightly fix them in your laundry for now.
gabbysnana,
Jul 25, 3:43pm
Put them back in the box and leave them in the garage for them to be thrown out at a later date or use the tiles properly theres no such thing as antiques, either you are using them or not.
summersunnz,
Jul 25, 8:23pm
I'd do that. plus put screw holes through the ply, where grouting will go, before fastening the tiles, so you can then fasten the whole thing to the wall - essentially creating a mosaic panel with the tiles on the ply.
Or use them for something that shows them off permanently - a tabletop, framed wall art, etc.
lesleyd3,
Sep 21, 1:47am
We are getting close to the tiling stage on this project. Any more ideas would be appreciated. If we were to fix them to thin line does anyone know an adhesive that could be removable? Is silicon best? Thanks
lilyfield,
Sep 21, 1:54am
Double sided picture hanging tape is very very strong
lesleyd3,
Sep 21, 2:50am
Is there a particular brand name for that?
superoman,
Sep 21, 2:54am
3m vhb tape
nzdoug,
Sep 21, 3:35am
bog
lilyfield,
Sep 21, 4:17am
Got mine at a two dollar shop.
rojill,
Sep 22, 6:31am
Silicone adhesive - available from Mitre 10 - use sparingly if you wish to remove at a later date
tintop,
Sep 22, 4:31pm
Depend on the grade.
Overhead sign panels on the motorway are held to their frames by 3M double sided tape :)
edjill41,
Sep 22, 10:07pm
Best thing is Command strips by 3M - totally hold all sizes and easily removable
lesleyd3,
Sep 23, 1:26am
Thanks for the ideas we will look into the 3M suggestions
soxxy,
Aug 16, 4:48am
Tile it to a thin particle board and leave enough space to put in screws into the wall behind it, then grout over the screw heads. Remove the screws and take the whole board with you if you want to remove them for whatever reason.
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.