can some one tell me is there special cement and sand that i need to use. Also do i need an additive of any kind! Or do i just mix the sand, cement and water! Thanks
skin1235,
Feb 24, 10:32am
standard plasterers mix add a cupfull of PVA glue to it per mix will work better if it is at least 15mm thick, a thin wipe over will not survive long
skin1235,
Feb 24, 10:35am
to repair chipped edges or holes in the step use a bolster or grinder to cut the area back to new surface, and if possible cut angles to allow a greater key - these should allow a minimum of 15mm and 20 is better, they can be finished to the original surface level
blueviking,
Feb 24, 8:21pm
2 1/2 Sand, 1 Cement & water., not too wet. Mix some PVa with water, add cement and mix to a thick paint consistency to use as a bonding agent to paint on the area you are going to patch.10mm thick on steps is plenty thick. any thicker and you tend to play with it to much and send it drummy.
klc101,
Mar 24, 2:50pm
sweet, thanks heaps. Will give it a go this weekend.
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.