I have some brass that needs cleaned up. What is the best way to do this, or best product to use please?
daryl14,
May 10, 8:18pm
Scotch bright/abrasive pad with brasso. When down to clean metal, then brasso with soft rags until polished.
gabbysnana,
May 10, 8:24pm
I bought autosol from mitre 10 also known as chrome glam man what a product.
rojill,
May 10, 8:24pm
Toothpaste and damp cotton rag
fefeoc,
May 10, 8:55pm
Brasso. Soft cloth. Elbow grease. Get these together on your item.
jills3,
May 10, 9:42pm
worstershire sauce works a treat.
trade4us2,
May 10, 11:45pm
Mix white vinegar and salt and wipe on. After that polish with Brasso or autosol. Don't use coarse abrasives.
ro42,
May 11, 5:13am
Brass-brite. Wipe on, polish off, no hard rubbing needed. Especially if your brass item is engraved and you don't want to use anything abrasive. But a word of warning: if you are doing a big piece, do it in stages as you can't let the brass-brite lotion dry on.
rainrain1,
May 11, 6:42am
I wouldn't use an abrasive pad, it will mark the brass, Use a soft cloth to apply, and a soft cloth to shine with
shanreagh,
May 11, 8:09am
Brasso and elbow grease.
daryl14,
Jan 13, 8:15am
I would, depending on how thick/old the oxide/verdigris layer is. Which the OP failed to specify.
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.