Accent Paint from Mitre 10

jh34, Aug 7, 11:20pm
I'm painting a toilet (walls ceiling) with Accent Primer Sealer Undercoat (water based) and I'm over coating with Accent Water Based Enamel Semi-gloss.

I've been looking for a bit more technical info because not all paints are created equal. But I don't see it for these paints? E.g abrasion resistance? It is one thing I noticed with Dulux also, you have to dig for technical data.
http://www.accentpaint.co.nz/preparation.html http://www.mitre10.co.nz/shop/paint_decorating/interior_paint/accent_water_based_enamel_semigloss_4_litre_white_183037/

rak1, Aug 8, 12:15am
I wouldnt expect there to be too much data around about this paint as it is their budget paint line. I have used if before in a situation where I didnt need to use quality paint and decided to never use it again even when it didnt really matter what paint was used. Its a tactile thing painting

jh34, Aug 8, 3:56am
"Accent by Wattyl is a high quality paint that comes at a great value price. Exclusively available at Mitre 10 and Mitre 10 MEGA stores nationwide and endorsed by Wattyl, Accent Paint is the solution to all your painting needs.
.
If it is low quality they could be taken to the [something] commission?

andrew1954, Aug 8, 4:11am
It must be good / top quality. It say so on the tin !

gabbysnana, Aug 8, 9:58am
I found it real good, nice to sand, sealed well, nice finsh. Did walls and ceilings.

smalltrader2, Nov 2, 12:59am
Accent is made by Wattyl but branded as M10's house brand. I have used the Accent Water Based Enamel and it is fine.

I would not be surprise if the paint come from the same production line at Wattyl then branded differently.