We have a badly pitted concrete path. Any suggestions on what to do to fix it. We can't lay stones over it as we have leaves falling onto the path and are always having to sweep.
tigra,
Oct 13, 1:54am
There is no solution except to rip it all up OR build up the concrete another 2 inches or so. Bet it was the injudicious use of a water blaster that created this mess.
diva008,
Oct 13, 2:35am
Have a look on a website seismic.co.nz
cagivachick1,
Oct 13, 6:57am
get a solid plasterer to put a coat of plaster over it
survivalkiwi,
Oct 13, 7:12am
tile it.
pico42,
Oct 13, 7:16am
Asphalt it.
tintop,
Oct 13, 8:22am
If it is badly pitted - then the original concrete is no good.
75mm topping with new concrete may help, digging the lot out and replacing with 75mm minimum is a better way to go.
ae64,
Oct 13, 9:31am
Cemix concrete resurfacer from placemakers
soxxy,
Oct 13, 8:07pm
Thanks for the advices
mrfxit,
Sep 2, 5:10pm
Presuming the path only has foot traffic on it & it's not badly cracked other wise, then . Water blaster & as above Cemix.
It's used a lot to create a smooth surface in bathroom floors /wet areas before tiling/ laying vinyl etc.
We had some left over from doing our bathroom & I laid it in a hollow part of the outside path. That was 5 years ago I it's still there in good condition
Since the public registrations are closed, you must have an invite from a current member to be able to register and post in this thread.
Have an account? Login here.